COACHBUILDER STEERING KIT BDS 4.5"-7" PROCOMP 6"-7" ZONE 5" TUNDRA 2007 - 2021

COACHBUILDER STEERING KIT BDS 4.5"-7" PROCOMP 6"-7" ZONE 5" TUNDRA 2007 - 2021

Coachbuilder Steering Kit,  Upgrade Your BDS 4.5 -7" / Fabtech 6" / ProComp 6"-7" / Zone 5" lift Kit.     

PLEASE NOTE: If the BDS or PROCOMP lift was installed in 2010 or earlier please use the OE Replacement Kit

Tundra 2007-2021 Models

Key Features:

Improved strength and increase travel in the steering by up to 30%.

Greatly reduce bump steer and uneven tire wear While improving steering response and control.

7075 Billet W/Hard Anodized Finish, 7/8″ heat treated 4130 chromoly rod end, PTFE inserts, 303 stainless misalignment shims, rubber grease boots and hardened hardware. Coachbuilder Steering Kits available for all Tundra applications and must be running at least a 20″ or larger wheels with a +25mm or less offset.

** Does require modification of Steering knuckle... ( Drill Bit included )  **

** Installs in 45-60 Mins

Alignment specs to use after installing:

Camber +.2 Degrees Per Side.

Caster +2.2 - +2.5 Degrees Per Side.

Toe +.07 - +.10 Degrees Per Side, Not to Exceed +.20 Combine. 

FREE HAWAII AND GUAM SHIPPING