This kit is what’s required to rebuild the uniballs in your Camburg upper arms and some of our lower arms. The kit includes two FK 1.25 uniballs and two snap rings. These are made in the USA and are not some cheap imported parts. They have a self-lubricating military grade PTFE liner internally for reduced stiction and noise. Having a 100,730 lbs. load rating, these are far stronger than OEM style ball-joints and cheaper or smaller uniball bearings. The bearing ID with the mis-alignment spacers removed is 1.25″ and the bearing OD is 2.375″.
Refer to our instructions for step-by-step directions.
Confirm sizing before ordering as some older version upper arms use a smaller 1.00″ uniball. Easiest way to tell is by the bolt. If the bolt is a hex head and above the uniball, than it’s a 1″ uniball as the 1.25″ has the bolt recessed below.
FK COMH-20T 1.25″ uniballs (2)
1.25″ uniball snap rings (2)
FITS CAMBURG UNIBALL UCA FOR THE FOLLOWING APPLICATIONS:
Make Model Year
Chevrolet/GMC 2500/3500 HD 2001-2021
Chevrolet/GMC Colorado/Canyon 2015-2021
Chevrolet/GMC Silverado/Sierra 1500 2007-2021
Chevrolet/GMC Tahoe/Yukon 2007-2020
Dodge/RAM Ram 1500 (DS) 2009-2021
Ford Bronco 2021-2021
Ford F-150 2004-2021
Ford Ranger 2019-2021
Ford Raptor 2010-2020
Lexus GX460 2010-2021
Lexus GX470 2003-2009
Toyota 4-Runner 2003-2021
Toyota FJ Cruiser 2007-2014
Toyota Hilux 2005-2018
Toyota Land Cruiser 200 2008-2021
Toyota Prado 120/150 2003-2018
Toyota Tacoma 2005-2021